银河集团(198net-VIP认证)精品网站-The Best Website

银河集团(198net-VIP认证)精品网站-The Best Website

C 点云示例代码-Point Cloud

# 点云示例-PointCloud

 

功能描述:连接设备开流,生成深度点云或RGBD点云并保存成ply格式文件,并通过ESC_KEY键退出程序

> 本示例基于C++ High Level API进行演示

 

创建点云保存成ply格式文件函数,ply文件格式详细描述可在网络上查看

//保存点云数据到ply
void save_points_to_ply( ob_frame* frame, const char* fileName ) {
    int pointsSize = ob_frame_data_size( frame, &error ) / sizeof( ob_point );
    check_error( error );

    FILE* fp = fopen( fileName, "wb+" );
    fprintf( fp, "ply\n" );
    fprintf( fp, "format ascii 1.0\n" );
    fprintf( fp, "element vertex %d\n", pointsSize );
    fprintf( fp, "property float x\n" );
    fprintf( fp, "property float y\n" );
    fprintf( fp, "property float z\n" );
    fprintf( fp, "end_header\n" );

    ob_point* point = ( ob_point* )ob_frame_data( frame, &error );
    check_error( error );
    for ( int i = 0; i < pointsSize; i++ ) {
        fprintf( fp, "%.3f %.3f %.3f\n", point->x, point->y, point->z );
        point++;
    }

    fflush( fp );
    fclose( fp );
}

//保存彩色点云数据到ply
void save_rgb_points_to_ply( ob_frame* frame, const char* fileName ) {
    int pointsSize = ob_frame_data_size( frame, &error ) / sizeof( ob_color_point );
    check_error( error );

    FILE* fp = fopen( fileName, "wb+" );
    fprintf( fp, "ply\n" );
    fprintf( fp, "format ascii 1.0\n" );
    fprintf( fp, "element vertex %d\n", pointsSize );
    fprintf( fp, "property float x\n" );
    fprintf( fp, "property float y\n" );
    fprintf( fp, "property float z\n" );
    fprintf( fp, "property uchar red\n" );
    fprintf( fp, "property uchar green\n" );
    fprintf( fp, "property uchar blue\n" );
    fprintf( fp, "end_header\n" );

    ob_color_point* point = ( ob_color_point* )ob_frame_data( frame, &error );
    check_error( error );

    for ( int i = 0; i < pointsSize; i++ ) {
        fprintf( fp, "%.3f %.3f %.3f %d %d %d\n", point->x, point->y, point->z, ( int )point->r, ( int )point->g, ( int )point->b );
        point++;
    }

    fflush( fp );
    fclose( fp );
}

 

创建Pipeline及流配置

//创建pipeline 用于连接设备后打开Color和Depth流
pipeline = ob_create_pipeline( &error );
//创建config,用于配置 Color 和 Depth 流的 分辨率、帧率、格式
ob_config* config = ob_create_config( &error );


//配置Color流
ob_stream_profile_list *colorProfiles = ob_pipeline_get_stream_profile_list(pipeline, OB_SENSOR_COLOR, &error);
if(error) {
    printf("Current device is not support color sensor!\n");
    ob_delete_error(error);
    error = NULL;
    // Turn on D2C alignment, which needs to be turned on when generating RGBD point clouds
    ob_config_set_align_mode(config, ALIGN_DISABLE, &error);
    check_error(error);
}
// Open the default profile of Color Sensor, which can be configured through the configuration file
if(colorProfiles) {
    color_profile = ob_stream_profile_list_get_profile(colorProfiles, OB_PROFILE_DEFAULT, &error);
}

    //配置Depth流
if(color_profile) {
    // Try find supported depth to color align hardware mode profile
    depthProfiles = ob_get_d2c_depth_profile_list(pipeline, color_profile, ALIGN_D2C_HW_MODE, &error);
    check_error(error);
    int d2cCount = ob_stream_profile_list_count(depthProfiles, &error);
    check_error(error);
    if(d2cCount > 0) {
        align_mode = ALIGN_D2C_HW_MODE;
    }
    else {
        // Try find supported depth to color align software mode profile
        depthProfiles = ob_get_d2c_depth_profile_list(pipeline, color_profile, ALIGN_D2C_SW_MODE, &error);
        check_error(error);
        d2cCount = ob_stream_profile_list_count(depthProfiles, &error);
        check_error(error);
        if(d2cCount > 0) {
            align_mode = ALIGN_D2C_SW_MODE;
        }
    }
}
else {
    depthProfiles = ob_pipeline_get_stream_profile_list(pipeline, OB_SENSOR_DEPTH, &error);
    check_error(error);

 

打开设备D2C功能

// Turn on D2C alignment, which needs to be turned on when generating RGBD point clouds
ob_config_set_align_mode(config, align_mode, &error)

 

开流

ob_pipeline_start_with_config(pipeline, config, &error);

 

在开流后创建点云filter。点云filter用于将depth和color帧数据转换成点云数据。点云filter在开流后创建目的是让SDK内部自动根据当前开流配置设置好相机参数。当然也可以自行设置。

// Create a point cloud Filter object (device parameters will be obtained inside the Pipeline when the point cloud filter is created, so try to configure
// the device before creating the filter)
ob_filter *point_cloud = ob_create_pointcloud_filter(&error);
check_error(error);

// Obtain the current open-stream camera parameters from the pipeline and pass them to the point cloud filter
ob_camera_param camera_param = ob_pipeline_get_camera_param(pipeline, &error);
check_error(error);
ob_pointcloud_filter_set_camera_param(point_cloud, camera_param, &error);
check_error(error);

 

启动主循环,循环内根据用户按键调用点云filter生成深度点云或RGBD点云数据,并保存成ply文件。

//等待一帧数据,超时时间为100ms
ob_frame *frameset = ob_pipeline_wait_for_frameset(pipeline, 100, &error);
check_error(error);
if(frameset != NULL) {
    // get depth value scale
    ob_frame *depth_frame = ob_frameset_depth_frame(frameset, &error);
    check_error(error);
    if(depth_frame == NULL) {
        continue;
    }

    // get depth value scale
    float depth_value_scale = ob_depth_frame_get_value_scale(depth_frame, &error);
    check_error(error);

    // delete depth frame
    ob_delete_frame(depth_frame, &error);
    check_error(error);

    // point position value multiply depth value scale to convert uint to millimeter (for some devices, the default depth value uint is not
    // millimeter)
    ob_pointcloud_filter_set_position_data_scale(point_cloud, depth_value_scale, &error);
    check_error(error);

    ob_pointcloud_filter_set_point_format(point_cloud, OB_FORMAT_RGB_POINT, &error);
    check_error(error);
    ob_frame *pointsFrame = ob_filter_process(point_cloud, frameset, &error);
    check_error(error);
    if(pointsFrame != NULL) {
        save_rgb_points_to_ply(pointsFrame, "rgb_points.ply");
        printf("rgb_points.ply Saved\n");
        ob_delete_frame(pointsFrame, &error);
        check_error(error);
        points_created = true;
    }
    ob_delete_frame(frameset, &error);  // Destroy frameSet to reclaim memory
    check_error(error);
    if(points_created) {
        break;
    }
}

 

主循环退出后,停流并销毁回收资源

// stop pipeline
ob_pipeline_stop(pipeline, &error);
check_error(error);

// destroy pipeline
ob_delete_pipeline(pipeline, &error);
check_error(error);

// destroy config
ob_delete_config(config, &error);
check_error(error);

// destroy profile
ob_delete_stream_profile(depth_profile, &error);
check_error(error);

// destroy profile
ob_delete_stream_profile(color_profile, &error);
check_error(error);

// destroy profile list
ob_delete_stream_profile_list(colorProfiles, &error);
check_error(error);

ob_delete_stream_profile_list(depthProfiles, &error);
check_error(error);

预期输出:

image.png 


XML 地图